Naboo145 CoB LED / Adjustable Optic - Wide Beam 50°
Outdoor recessed lighting from Ares
Product description
534017
NATURAL WHITE 4000K
CoB LED
6W/220÷240V
Total power 9W
lm LED 959 ≠ lm OUTPUT 610
CRI >80
Kit with remote electronic power supply included
534018
WARM WHITE 3000K
CoB LED
6W/220÷240V
Total power 9W
lm LED 922 ≠ lm OUTPUT 586
CRI >80
Kit with remote electronic power supply included
NATURAL WHITE 4000K
CoB LED
6W/220÷240V
Total power 9W
lm LED 959 ≠ lm OUTPUT 610
CRI >80
Kit with remote electronic power supply included
534018
WARM WHITE 3000K
CoB LED
6W/220÷240V
Total power 9W
lm LED 922 ≠ lm OUTPUT 586
CRI >80
Kit with remote electronic power supply included
Concept
• Round luminaire for installation in-ground – recessed.
• Configuration: three sizes available. Die-cast aluminium structure and heat sink, EN AB-47100 alloy (low copper content). AISI 316L stainless steel outer frame. Glass
diffuser: transparent with silkscreen border.
• Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Light Emission: Fully adjustable optic, different beams
• Protection rating: IP67
• In compliance with EN60598-1 standards
• Class of insulation: II
• Installation: the luminaire is equipped with a watertight
M12 screw-connector providing optimal insulation against water ingress and quick connection to the power supply unit (supplied with the luminaire as a remote IP67 Kit with electronic power supply). The power supply unit is equipped with a piece of cable of 400mm with screw connector towards the luminaire and a piece of cable of 300mm to be used for wiring. Outdoor use requires suitable flexible cables. Installation requires a dedicated box to be ordered separately. It is important to provide a >300mm gravel layer or a drain system (for concrete surface) to ensure good drainage and to avoid water stagnation.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
.0 Inox
• Configuration: three sizes available. Die-cast aluminium structure and heat sink, EN AB-47100 alloy (low copper content). AISI 316L stainless steel outer frame. Glass
diffuser: transparent with silkscreen border.
• Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Light Emission: Fully adjustable optic, different beams
• Protection rating: IP67
• In compliance with EN60598-1 standards
• Class of insulation: II
• Installation: the luminaire is equipped with a watertight
M12 screw-connector providing optimal insulation against water ingress and quick connection to the power supply unit (supplied with the luminaire as a remote IP67 Kit with electronic power supply). The power supply unit is equipped with a piece of cable of 400mm with screw connector towards the luminaire and a piece of cable of 300mm to be used for wiring. Outdoor use requires suitable flexible cables. Installation requires a dedicated box to be ordered separately. It is important to provide a >300mm gravel layer or a drain system (for concrete surface) to ensure good drainage and to avoid water stagnation.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
.0 Inox
More about this product
Categorised in Outdoor lighting - Outdoor recessed lighting - General lighting - Spotlights - LED lights.
Part of the collection
GROUND RECESSED.
Manufacturer
Ares
Family
Naboo
Architonic ID
1343873
Order number
534017
Year of Launch
2014
Related Projects
This product has been archived. Product information may no longer be up to date.
Where to buy this product
Where to buy this product