Wallbox Draw BASIC Charge 2 - 22kW/32A - 11kW/16A with 2x Type 2 charging cable Height 1300mm RAL of your choice
Sockets from Briefkasten Manufaktur
Product description
Charging pole Draw BASIC Charge 2 - 22kW/32A - 11kW/16A with 2x Type 2 charging cable The high-quality manufactured charging pole Draw with 2x Type 2 charging cable (5.0m) is ideally suited for areas with high demands on design, functionality and safety. As a multiple solution for demanding car park environments or as a single solution for the home. The simple design blends in harmoniously. The Draw charging pole is equipped with a key switch including 2 keys with key number, so access is only possible when the key switch is switched on. The complete charging pole is made of stainless steel V2A 1.4301 and ground with 240 grain or powder coated in RAL colour. Long durability and easy maintenance are guaranteed by the selected materials. Due to the straightforward design and the functional construction, the charging pole is easy to maintain or clean and to keep in good condition. BMLsystems also attaches great importance to the highest quality when selecting the right material. The material stainless steel fulfils all conditions in an excellent way and has an extremely high corrosion resistance and an always striking surface finish. Optionally, labelling with our high-quality laser engraving is possible, so that parking space numbers, names or pictograms can be lasered on. Please feel free to ask us about this. Simple installation by a specialist electrician The Draw charging pole is pre-installed and ready for connection. Your electrician only has to wire the supply line and add the sub-distribution and you can start charging immediately. Thanks to its solid construction, the charging pole is ideally protected against vandalism and if something should be destroyed, you can simply replace the defective components. The Draw charging pole is very easy to access thanks to the inspection flap on the back and can be installed and maintained very easily. Thanks to the modular design, all components, from the panel to the charging unit, can be replaced at any time. The charging system - BASIC Charge 2 With a flexible charging capacity of up to 22kW/32A 3-phase, the BC2 is compatible with all type 2 electric cars. The BC2 is authorised in the charging pole Draw by means of a key switch. Integrated local load management for stand-alone charging solution - Distributes the available nominal current between the two charging points. If one charging point is used, 22kW are available, if both are used, 11kW each are available. Features Charging pole for free-standing installation with front panel made of 2mm stainless steel V2A 1.4301. Front panel optionally in 240 grain polished or RAL/DB colour of choice. Quality production - Made in Germany - BMLsystems. With key switch: holiday configuration, therefore when switched on the key can be removed and always loaded. Status indication by LED signal lamp. Integrated charging system BC2 for fast charging with 22 kW (up to 10x faster than at a normal household socket). Charging time approx. 60 minutes (depending on battery capacity and charging power of the electric vehicle)*. High-quality AC charging system - Made in Germany - Phoenix Contact (CHARX) integrated. Load management local - Distributes the available nominal current between the two charging points. Printed installation instructions, operating instructions and declaration of conformity included. High protection class and therefore usable in any weather situation (protection class IP54). Integrated AC/DC fault current detection. The fully welded charging pole is made of 2 mm stainless steel V2A 1.4301. Invisible cable feed through the body. Rear access panel with ventilation openings. *Based on the maximum output power, an average expected battery capacity of 20 kWh and a charger in the vehicle corresponding to the max. output power. Dimensions Stele dimensions: H 1300 mm | 1800 mm x W 290 mm x D 182 mm. Dimensions foot plate: H 10 mm x W 380 mm x D 272 mm. Weight: approx. 55kg | 65kg. Important information Please note that a professional installation by an electrician is required for the use of the included wallbox.
Concept
The BASIC collection of letterboxes, free-standing letterboxes and letterbox systems is characterised by its excellent price-performance ratio and great flexibility. Single boxes as letterbox system, often without cladding (optionally selectable). The most economical variant of the system. These systems can be equipped with many optional extras such as rain roofs. Available in steel, galvanised and powder-coated in RAL 7016 anthracite grey, RAL 9016 chrome white or DB 703 micaceous iron ore or in stainless steel, ground or stainless steel, powder-coated in RAL of your choice.
More about this product
Categorised in Sockets - Urban space.
Part of the collection
CHARGING STATIONS & ELECTROMOBILITY.
Manufacturer
Briefkasten Manufaktur
Family
Basic
Architonic ID
20296234
Order number
90040-BC2-1300-RAL
Year of Launch
2022
More products from Basic family
Downloads
Manufacturer’s Catalogues
Contact information
Address
Werler Str. 60, 32105 Bad Salzuflen Germany
Map
Estimated price
The price is estimated using the manufacturer's recommended retail price (RRP) and excludes VAT and other additional costs. For exact pricing, customised offers and purchase information, please contact the manufacturer via our request form.
€6,160
Get more information
Sign in to your Architonic account to have your contact details filled out automatically for each request.
Where to buy this product
More from
Briefkasten ManufakturContact information
Address
Werler Str. 60, 32105 Bad Salzuflen Germany
Map
Where to buy this product