BMLsystems charging pole Plug BASIC Charge 1X 22kW/32A with letterbox Designer BIG - RAL of your choice - INDIVIDUAL High-quality manufactured charging pole or letterbox pole of the brand Briefkasten Manufaktur. Clear lines, no-frills design and high-quality materials characterise the Plug charging pole made of 3mm stainless steel V2A. The charging pole is fully welded so that no screw connections, hairline joints or gaps are visible in the area of the body. This is a real eye-catcher among the letterboxes. Clear lines and no-frills design characterise the designer letterbox. Our products have a high value, reliable functionality and their own identity. Made by Briefkasten Manufaktur. The Plug charging pole with Type 2 socket is ideal for areas with high demands on design, functionality and security. As a multiple solution for demanding car park environments or as a single solution for the home. The simple design blends in harmoniously. The Plug charging pole is equipped with a key switch including 2 keys with key number, so access is only possible when the key switch is switched on. The complete charging pole is made of stainless steel V2A 1.4301 and powder-coated in RAL colour. The Plug charging pole is pre-installed and ready for connection. Your electrician only has to wire the supply line and complete the sub-distribution and you can charge directly. Thanks to its solid construction, the charging pole is ideally protected against vandalism and if something should be destroyed, you can simply replace the defective components. The Plug charging pole is very easy to access thanks to the inspection flap on the back and can be installed and maintained very easily. Thanks to the modular design, all components, from the cover to the charging unit, can be replaced at any time. Letterbox column/loading unit made of 3mm stainless steel V2A 1.4301, powder-coated in RAL colour. This is a patented letterbox system: letterbox system with charging unit - patent application 10 2020 101 701.4. charging system - BASIC Charge 1X by BMLsystems. Rear inspection flap W 250 mm x H 700 mm incl. 2 keys. The pedestal is equipped with a base plate made of VA. This is 10 mm thick and is finished with a cover plate. See pictures. Invisible cable feed through the body is possible. The letterbox module is made of 2 mm stainless steel V2A 1.4301, powder-coated in RAL colour. Frontal mail removal door W 350 mm x H 300 mm. Mail slot from the front, slot size suitable for C4 landscape (BH 350mm x 63mm). Mail slot with built-in damping elements that allow the slot flap to close slowly and quietly. The pedestals are equipped with modules that can be exchanged at a later date. Optionally replaceable nameplate made of stainless steel with laser inscription or nameplate made of Plexi. Optionally with house number in polished optics (67mm high), offset or house number approx. 70mm high (max. 3 digits) with energy-saving LED lighting 12V DC approx. 50mA / 1W, white. Incl. EVN LED power supply unit / transformer IP65 12V/DC 0.1?4W for LED lighting (house number, bell push button and nameplate if selected). 8-12V DC short-stroke bell push button with LED ring lighting (blue, white, red or green). The illumination of the bell push button cannot be supplied via the control unit. It must be connected to an additional 8-12 V DC power supply. An 8-12 V DC short-stroke light pushbutton with pictogram is available as an option. Preparation (built-in loudspeaker not included) for intercom possible. Optionally with universal adapter for all commercially available built-in loudspeakers. Optional preparation (camera not included in scope of delivery) for a camera. Invisible cable feed through the corpus possible. The charging system - BASIC Charge 1X Quality manufacturing - Made in Germany - BMLsystems. With key switch: holiday configuration, therefore when switched on the key can be removed and always charged. Status indication by LED signal lamp. Integrated charging system BC1X for fast charging with 22 kW (up to 10x faster than at a normal household socket). Charging time approx. 60 minutes (depending on battery capacity and charging power of the electric vehicle)*. High-quality AC charging system - Made in Germany - Phoenix Contact (CHARX) integrated. Includes printed installation instructions, operating instructions and declaration of conformity. High protection class and therefore usable in any weather situation (protection class IP54). Integrated AC/DC fault current detection. Learn more about the BASIC Charge charging system... *Relating to the maximum output power, an average expected battery capacity of 20 kWh and a charger in the vehicle corresponding to the max. output power. Technical data BASIC Charge 1X Display (operating status / error display): LED Operating mode: client , server , stand-alone Energy meter: without Charging connection: type 2 socket Charging controller: AC charge controller CHARX by Phoenix Contact Charging mode: mode 3 Charging standard: IEC 61851-1 Load switch: installation contactor, 4-pole, 40 A Rated frequency: 50 / 60 Hz Rated voltage: 220 ... 240 V / 380 ... 415 V Rated current: 16 ? 32 A Phases: 3 Protocols: HTTP , HTTPS , MQTT , Modbus TCP , OCPP 1.6J Interfaces: Etdernet , RS-485 (energy meter, RFID reader) , USB-C Protection class: IP54 Protection device: AC residual current 30 mA , residual current circuit breaker FI type B Protection class: I Ambient temperature operation: -25 °C to +40 °C Ambient temperature storage: -35 °C to +70 °C Access protection: key switch max. charging power: 22kW Overvoltage category: III Important information Please note that professional installation by an electrician is required for the use of the included charging technology. Camera or intercom preparation We recommend that the electrical installation is always carried out by an electrician. We offer the preparation of cameras & intercoms from various manufacturers for our letterboxes. The preparation does not include any terminal devices, it is the provision of the screw mounts, drill holes & perforations. So that you can mount your terminal device without any problems. Water protection To achieve optimum water protection for your mail, the letterbox or letterbox system should, if possible, be located under a canopy. Mail is only protected from water if it is completely inserted in the box and the insertion flap is closed. Mail that is not completely inserted allows moisture and dirt to penetrate the letterbox. It is therefore necessary to plan sufficiently dimensioned letterboxes for the upcoming demand. In certain extreme weather conditions, water may nevertheless enter (according to DIN EN 13724 up to 1ccm). This is not a reason for complaint.
Concept
The BASIC collection of letterboxes, free-standing letterboxes and letterbox systems is characterised by its excellent price-performance ratio and great flexibility. Single boxes as letterbox system, often without cladding (optionally selectable). The most economical variant of the system. These systems can be equipped with many optional extras such as rain roofs. Available in steel, galvanised and powder-coated in RAL 7016 anthracite grey, RAL 9016 chrome white or DB 703 micaceous iron ore or in stainless steel, ground or stainless steel, powder-coated in RAL of your choice.
Manufacturer
Briefkasten Manufaktur
Family
Basic
Architonic ID
20296225
Order number
602BMLS-R-IND-R
Year of Launch
2022
Previous Product 
Search products by image
Map 
Pin it 
Save as pdf
