Panic bar to EN 1125 glow - luminescent | PS160XA11
Panic hardware from HEWI, Designed by NOA Produktdesign
Product description
System 162 panic bar
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. 20 mm wide luminescent rings on the two outer sides for orientation in case of light failure. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished
Designed and tested for projects, classification to EN 1125
user category: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
Article no.: HEWI PS160XA11
Article no.: HEWI PS160XA31 - System 162 panic bar
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. 20 mm wide luminescent rings on the two outer sides for orientation in case of light failure. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished
Designed and tested for projects, classification to EN 1125
user category: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. 20 mm wide luminescent rings on the two outer sides for orientation in case of light failure. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished
Designed and tested for projects, classification to EN 1125
user category: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
Article no.: HEWI PS160XA11
Article no.: HEWI PS160XA31 - System 162 panic bar
for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf)
Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. 20 mm wide luminescent rings on the two outer sides for orientation in case of light failure. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm.
Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished
Designed and tested for projects, classification to EN 1125
user category: Class 3
Durability: Class 7
Door mass: Class 6
Suitability for use on fire and smoke doors: Class B
Safety - personal protection: Class 1
Corrosion resistance: Class 3
Security - burglary protection: Class 2
Projection of device: Class 2
Type of device: A
Field of door application: Class A
Concept
The design and fitout of buildings should focus on people's safety. Securing exit routes is especially important. Special solutions for exit doors must enable fast escape in an emergency. This means that a user must be able to open emergency exits by hand with minimum effort and without prior knowledge of how to operate the panic exit device. HEWI panic bars can be operated intuitively with minimum effort and therefore fulfil the EN 1125 requirements for panic door devices.
More about this product
Part of the collection
HARDWARE.
Manufacturer
HEWI
Family
Panic Bar
Architonic ID
20025518
Order number
PS160XA11
Year of Launch
2019
More products from Panic Bar family
Downloads
Manufacturer’s Catalogues
Related Articles
Contact information
Address
Prof.-Bier-Straße 1-5, 34454 Bad Arolsen Germany
Map
Get more information
Sign in to your Architonic account to have your contact details filled out automatically for each request.
Where to buy this product
More from
HEWIContact information
Address
Prof.-Bier-Straße 1-5, 34454 Bad Arolsen Germany
Map
Where to buy this product