Masterbox® Design Highboard 3 FH
Search products by image
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
Product description
Highboard on gliders with back panel and swing doors: W 800 x D 400 x H 1200mm;
in the back: wall-mounted open loop: W 1600 x D 400 x H 200mm;
2 wall hanging elements consisting of loop with swing doors, above open loop, above Masterbox body with swing door: W 400 x D 400 x H 1600mm;
Freestanding on the right back 2 carcasses with swing doors and back panel,
Above 2 loops (the right one with back panel): W 1600 x D 400 x H 1200mm;
open loop with angle cushion: W 500 x D 400 x H 500mm (incl. angle cushion)
in the back: wall-mounted open loop: W 1600 x D 400 x H 200mm;
2 wall hanging elements consisting of loop with swing doors, above open loop, above Masterbox body with swing door: W 400 x D 400 x H 1600mm;
Freestanding on the right back 2 carcasses with swing doors and back panel,
Above 2 loops (the right one with back panel): W 1600 x D 400 x H 1200mm;
open loop with angle cushion: W 500 x D 400 x H 500mm (incl. angle cushion)
Concept
Masterbox® multi-furniture system
Well-functioning office spaces need a structured room design that supports the efficiency of processes and workflows. Inwerk's Masterbox® multi-furniture system plays a key role in this respect, as it organises offices in a clear structure and at the same time provides the necessary storage space, allowing them to be tailored precisely to customer requirements. The modular steel construction system, which was honoured with the red dot award in 2017, is universal and can be used individually at the same time.
The cubic modules are available in a wide variety of configurations and sizes and fit perfectly into any environment as sideboards, cabinet walls, wall mounted cabinets, shelves, containers and room dividers. In combination with an upholstered element, the double function of the storage space furniture turns it into a seat close to the workplace. If required, each configuration can be extended and reduced as well. Masterbox® guarantees economic space utilisation on one hand and offers the option of planning offices with only one system in a consistent design on the other.
The Masterbox® modules feature 45 degree edges, equal at the front and rear, which emphasise the filigree geometry and allow flush-fitting doors, flaps and rear panels. No noticeable duplication of material occurs when the boxes are stacked. Optically homogeneous front and side elements are made of two parts and can be configured in one or two colours - in black and white powder-coated or completely in chrome steel.
The foamed steel construction is extremely stable. Therefore, boxes up to 1600mm wide can be designed without divider and rear panel, horizontal as well as vertical straight and staggered stackable.
Each Masterbox® configuration can be converted as often as required and tool-free. A magnetized film assembles the modules in a position-variable and fixed manner.
Well-functioning office spaces need a structured room design that supports the efficiency of processes and workflows. Inwerk's Masterbox® multi-furniture system plays a key role in this respect, as it organises offices in a clear structure and at the same time provides the necessary storage space, allowing them to be tailored precisely to customer requirements. The modular steel construction system, which was honoured with the red dot award in 2017, is universal and can be used individually at the same time.
The cubic modules are available in a wide variety of configurations and sizes and fit perfectly into any environment as sideboards, cabinet walls, wall mounted cabinets, shelves, containers and room dividers. In combination with an upholstered element, the double function of the storage space furniture turns it into a seat close to the workplace. If required, each configuration can be extended and reduced as well. Masterbox® guarantees economic space utilisation on one hand and offers the option of planning offices with only one system in a consistent design on the other.
The Masterbox® modules feature 45 degree edges, equal at the front and rear, which emphasise the filigree geometry and allow flush-fitting doors, flaps and rear panels. No noticeable duplication of material occurs when the boxes are stacked. Optically homogeneous front and side elements are made of two parts and can be configured in one or two colours - in black and white powder-coated or completely in chrome steel.
The foamed steel construction is extremely stable. Therefore, boxes up to 1600mm wide can be designed without divider and rear panel, horizontal as well as vertical straight and staggered stackable.
Each Masterbox® configuration can be converted as often as required and tool-free. A magnetized film assembles the modules in a position-variable and fixed manner.
More about this product
Categorised in Storage - Shelving - Sideboards - Shelving systems - closed base - free-standing - with drawers - Wood - Engineered wood - Structure engineered wood - Base engineered wood - Residential - Contract - Office.
Part of the collection
SIDEBOARDS.
Manufacturer
Inwerk
Family
Masterbox®
Architonic ID
1520971
Order number
BM71292
Year of Launch
2017
Similar products
This product has been archived. Product information may no longer be up to date.
Similar products
Where to buy this product
Where to buy this product