Shot LEDS Projector

The SHOT exterior LED projector is for accent lighting applications and is available in monocolour LEDs (neutral white 4650ºK, warm white 3150 ºK) and RGB LEDs.
The LEDs it uses, which are highly efficient (lm/w), allow low consumption and minimum maintenance thanks to their 60,000 hours of working life. There are models with Spot optics and models with Medium Flood optics. The RGB model is controlled by way of a DMX-RDM regulation system.

All models are class II, IP65, IK09 and are manufactured with injected aluminium lacquered in texturised grey polyester. The unit incorporates cooling ribs so that the LEDs and drivers work under optimum conditions as well as a collapsible cover which aids the installation and maintenance of the drivers. The projector loop has a goniometer which facilitates its orientation and affixation.

By dint of its technical performance and sturdy design, it is ideal for lighting up public areas such as gardens, squares, monuments, roundabouts and façades. It has various accessories such as clamps and arms for coupling to any kind of column.

DMX-RDM Controller.
The SHOT RGB luminaire is controlled by way of a DMX-RDM protocol. DMX (Digital Multiplexing) is a digital protocol for high-speed regulation which can govern a maximum of 512 directions. Thanks to RDM bidirectionality (Remote Device Management), it is not necessary to open the luminaires to assign the DMX directions, thereby facilitating the installation of the luminaires and their programming.
By way of the USB-DMX/RDM control pack (96.40.79.0) we can create multiple, suggestive effects of light and colour in simple, intuitive fashion.

The USB-DMX/RDM control pack is formed by:
1. USB Driver with ECCO software (light and colour effects programme).
2. USB cable for passing the information from the computer to the DMX-RDM device.
3. DMX-RDM device where we will keep the lighting programme carried out.
DMX cable for transmitting data from the DMX-RDM device to the luminaires installed.