Islands low table
Side tables from Living Divani, Designed by Stephen Burks
Search products by image
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
- Family gallery
Product description
Set of coffee tables of three different heights and diameters, accessible along the entire perimeter thanks to a series of pivoting slats, available both for indoor and outdoor.
Indoor version: top and bottom in 19 mm thick, contoured and bevelled MDF, with the bottom part always lacquered with epoxy powder coating matt black, and top available veneered charcoal dyed oak or Stone Oak®, with bevelled edge always lacquered with epoxy powder coating matt black; all lacquered matt black; in red Levanto or Sahara Noir marble (thickness 15 mm), fixed to the MDF top through screws, with a satin finish and an opaque transparent protective varnish
or a matt or glossy polyester finish. Slats, with elliptical 70 x16 mm cross-section, in aluminium extrusion, fixed to the top and to the bottom by means of turned details in black nylon and tie rods. Slats available painted matt black, veneered in charcoal dyed oak or in Stone Oak®. Feet, with elliptical cross-section, made in aluminium extrusion screwed to the basis and always with matt black finish. Floor support secured by contoured feet.
Outdoor version: top and bottom in 20 mm thick, contoured and bevelled Purenit®, always matt black lacquered. Slats, with elliptical 70 x16 mm cross-section, in aluminium extrusion, fixed to the top and to the bottom by means of turned details in black nylon and tie rods. Feet, with elliptical cross-section, made in aluminium extrusion screwed to the basis and always with matt black finish.
Floor support secured by contoured feet.
Indoor version: top and bottom in 19 mm thick, contoured and bevelled MDF, with the bottom part always lacquered with epoxy powder coating matt black, and top available veneered charcoal dyed oak or Stone Oak®, with bevelled edge always lacquered with epoxy powder coating matt black; all lacquered matt black; in red Levanto or Sahara Noir marble (thickness 15 mm), fixed to the MDF top through screws, with a satin finish and an opaque transparent protective varnish
or a matt or glossy polyester finish. Slats, with elliptical 70 x16 mm cross-section, in aluminium extrusion, fixed to the top and to the bottom by means of turned details in black nylon and tie rods. Slats available painted matt black, veneered in charcoal dyed oak or in Stone Oak®. Feet, with elliptical cross-section, made in aluminium extrusion screwed to the basis and always with matt black finish. Floor support secured by contoured feet.
Outdoor version: top and bottom in 20 mm thick, contoured and bevelled Purenit®, always matt black lacquered. Slats, with elliptical 70 x16 mm cross-section, in aluminium extrusion, fixed to the top and to the bottom by means of turned details in black nylon and tie rods. Feet, with elliptical cross-section, made in aluminium extrusion screwed to the basis and always with matt black finish.
Floor support secured by contoured feet.
Concept
Open container accessible around the entire perimeter thanks to a series of pivoting slats. Top and bottom in 19mm thick, contoured and with bevelled MDF, with the bottom part always lacquered with epoxy powder coating matt black, and top available veneered in Canaletto walnut "rigatino", charcoal dyed oak, or Stone Oak ®, with bevelled edge always lacquered with epoxy powder coating matt black, or all matt black lacquered.
Slats, with elliptical 70x16mm cross-section, in aluminium extrusion, fixed to the top and to the bottom by means of turned details in black nylon and tie rods. Bridge legs, with elliptical cross-section feet, made in “sandwich” of MDF and steel sheet pressed and glued together.
Slats and feet are always with matt black finish.
Floor support secured by black PVC feet.
Slats, with elliptical 70x16mm cross-section, in aluminium extrusion, fixed to the top and to the bottom by means of turned details in black nylon and tie rods. Bridge legs, with elliptical cross-section feet, made in “sandwich” of MDF and steel sheet pressed and glued together.
Slats and feet are always with matt black finish.
Floor support secured by black PVC feet.
More about this product
Categorised in Tables - Side tables - Tabletop round - 4-leg base - closed base - Wood - Tabletop engineered wood - Base engineered wood - Residential - Contract - Hospitality.
Part of the collection
TABLES / COMPLEMENTS.
Manufacturer
Living Divani
Family
Islands
Architonic ID
20157524
Year of Launch
2020
More products from Islands family
Downloads
Manufacturer’s Catalogues
Contact information
Address
Strada del Cavolto, 22040 Anzano del Parco (Co) Italy
Map
Get more information
Sign in to your Architonic account to have your contact details filled out automatically for each request.
Where to buy this product
More from
Living DivaniContact information
Address
Strada del Cavolto, 22040 Anzano del Parco (Co) Italy
Map
Where to buy this product