Filing Cabinets

Framed or dismantlable monobloc cabinets designed for storing and organising documents and other elements, combining maximum functionality and adaptability with good design and ergonomics. They incorporate a variety of environmental concepts aimed at achieving furniture units that are in tune with the environment throughout their life cycle.

LOCKERS:
MM
Monobloc or dismantlable lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Lockers with metal doors or top trim.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Smart unit designed with excellent functionality in mind. Very hard-wearing units that ensure a useful lifespan of at least 25 years. Fitted with height adjustment levelling and a doorknob with a lock and a set of keys. Fitted with racks for adjustable shelves prepared for hanging DIN-A4 format folders. It can be adapted the user, with the possibility of adjusting the shelves or adding accessories (telescopic frames, telescopic drawers, vertical dividers, etc.). It also enables cabinets to be created with a full door or with a door at the bottom and the top part without doors, bookcase style, or glass doors.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
Cabinets of different heights: 1,800, 1,600 or 1,000, with a width of 950 and a depth of 450.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE EN14074:2005, UNE-EN 14073-2:2005 and UNE-EN 14073-3:2005

MA
Monobloc or dismantlable lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Possibility of doors and trim top of recyclable laminate, low in formaldehyde, with ABS edges and adhesives free of VOCs and heavy metals. The laminates comply with standards UNE-EN- 438-2:2005 and UNE-56843:2001.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Smart unit designed with excellent functionality in mind. Very hard-wearing units that ensure a useful lifespan of at least 25 years. Fitted with height adjustment levelling and a doorknob with a lock and a set of keys. Fitted with racks for adjustable shelves prepared for hanging DIN-A4 format folders. It can be adapted the user, with the possibility of adjusting the shelves or adding accessories (telescopic frames, telescopic drawers, vertical dividers, etc.). It also enables cabinets to be created with a full door or with a door at the bottom and the top part without doors, bookcase style, or glass doors.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
Cabinets of different heights: 1,800, 1,600 or 1,000, with a width of 950 and a depth of 450.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE EN14074:2005, UNE-EN 14073-2:2005 and UNE-EN 14073-3:2005



P/M/C at 1000c
Monobloc or dismantlable lockers in polished cold-laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality complying with European standard EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
A unit with a basic design in terms of functionality and quality to price ratio. Very hard-wearing units that ensure a useful lifespan of at least 25 years. Hinged, folding or sliding metal doors. Fitted with internal P series hinges with knobs and M series with handle. Fitted with racks for adjustable shelves designed for DIN-4 format hanging folders.
A variety of heights, widths and depths, designed to satisfy the users’ requirements.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
Cabinets of different heights: 1,800, 1,600 or 1,000, with a width of 950 and a depth of 450.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE EN14074:2005, UNE-EN 14073-2:2005 and UNE-EN 14073-3:2005


DRAWERS:
BM2
Exclusive series of office drawer units available in a wide range of materials and finishes. Body finished in polished cold laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality in accordance with European standards EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
The body is finished in epoxy paint at all times, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Smartly designed units adapted to the users’ requirements in terms of functionality, with the possibility of being fitted with either pedestal or castors. Very hard-wearing units that ensure a useful lifespan of at least 25 years. Fitted with drawers with metal guides running on ball bearings and/or DIN-A4 folder file, with fully extractable telescopic guides, depending on the model. A locking device that locks all the drawers.
Possibility of choosing metal or recyclable laminate fronts, low in formaldehyde, with ABS edges and adhesives free of VOCs and heavy metals. The laminates comply with standards UNE-EN- 438-2:2005 and UNE-56843:2001.
Same dimensions 420 x 560 x 575, with a variety of different drawer possibilities.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE EN14074:2005, UNE-EN 14073-2:2005 and UNE-EN 14073-3:2005

FILING CABINETS:
F-1304-A
Monobloc filing cupboards in polished cold laminated steel sheet, with approximately 30-50% of its content being recycled steel of a quality in accordance with European standards EN10130-99. Sheet metal with a thickness of 0.7 or 0.8 mm, and completely recyclable at the end of its life. All the manufacturing processes are controlled in order to ensure the minimum environmental impact.
Finished in epoxy paint, following a procedure with a low environmental impact, with no atmospheric emissions, monitoring of liquid waste discharge and complete reduction of hazardous substances and waste products. Colours can be chosen from the range offered.
Smartly designed units adapted to the users’ requirements in terms of functionality, with the possibility of different models depending on capacities, drawers and degree of sturdiness. Very hard-wearing units that ensure a useful lifespan of at least 25 years. Fitted with drawers with metal guides running on ball bearings, with fully extractable telescopic guides, and depending on the model it will incorporate an anti-tip system. A locking device that locks all the drawers. Every model has a weight limit for every drawer specified according to technical characteristics.
The big drawers are fitted with an adjustable frame for three standard folder formats, with the optional possibility of requesting folder dividers. The small drawer is divided in two rows for filing cards with maximum dimensions of 100 x 18 mm, and is provided with a card divider for every row.
Same width and depth dimensions 490 x 620, with different possibilities in terms of height and drawers.
The packaging is designed to ensure protection during transport, and is made of materials that are recycled and completely recyclable in a municipal treatment system.
These units do not require excessive maintenance and can be cleaned with water alone, and where necessary, with neutral cleaning products.
Various tests have been performed, in accordance with UNE EN14074:2005, UNE-EN 14073-2:2005 and UNE-EN 14073-3:2005