Wall bearing for rod Ø12 mm, axial mounting
Curtain fittings from PHOS Design
Product description
Our axial stainless steel wall brackets are suitable for concealed and solid installation of rods with a diameter of 12 mm in recesses or from wall to wall. The wall bracket consists of an inner and outer sleeve that can be installed quickly and easily. The inner sleeve is screwed centrally to the wall, while the outer sleeve slides precisely over it and is fixed in place with 2 grub screws. The 1-point screw connection ensures stable fastening. A stainless steel screw with Fischer Duopower dowel is included.
Dimensions
Ø18 mm, depth 11 mm.
Dimensions
Ø18 mm, depth 11 mm.
Concept
Thanks to their material properties, stainless steel curtain poles open up a wide range of design options, and not just for decoration. The basis is our rod system, which can be variably attached to the wall, floor or ceiling. Rods can be single or double-run, run around corners or in an arc. Different wall spacings, support variants and end pieces open up a planning spectrum that can be extended by custom-made products. All elements speak the typical PHOS design language in a clear form. And if a rod is to be tensioned like a cable without a central support, our tension rod is a visually and technically outstanding solution for spans of up to 8 meters without an intermediate support.
More about this product
Categorised in Curtain fittings - Interior construction.
Part of the collection
ROD SYSTEMS.
Manufacturer
PHOS Design
Family
Curtain rods | Rod systems
Architonic ID
1459364
Order number
WL12
Year of Launch
2017
More products from Curtain rods | Rod systems family
Contact information
Address
Werftstraße 12, 76189 Karlsruhe Germany
Map