Gray Mountain

Product Features General
Our SAXAflect - Products combine a number of outstanding features. Of particular importance are the low weight and the low depth.
The low weight is particularly advantageous for ventilated curtain facades, because the substructure can be carried out substantially simpler.
As cladding elements are lightweight panels used (for example made of folded aluminum), coated with the flexible sandstone, instead of massive stone slabs.
The overall construction is so significantly less expensive. The savings potential is between 30% and 50%.
The low mounting height (about 3 mm) allow the use of the products under the most difficult space conditions. A complex substructure is not required.
The saved costs from this area can be used for the quality of surface coating.


Flexible sandstone - Saxaflect

Raw materials: Sedimentary sandstone layers of quartz sand according to DIN 4924 and based on EN 12904, Type 1, (here as natural raw material). Named data are statistical values, deviations are possible.

Carrier: Natural fiber fabric with Dipersions binder (solvent-free)

Colors / textures: The basic colors of the textures are generally assured. Slight natural color variations
may occasionally occur, because only natural sands are used. The appearances of the materials may diverge. This is an intentional effect and no cause for complaint. It results from the composition of the material in production process.

Areas of application: Indoor and outdoor use in accordance of the processing instruction

Grain density: 2.65 g/cm³

Thermal expansion: 0 - 2 mm/m at 100 °C.

Temperatures: Processing at +5 °C to +30 °C.

PH value in water: 6.0 - 6.5

Melting point: > 1550 °C

Kindling temperature: not applicable

Viscosity: not applicable

Odor: odorless

Pack sizes: Web materials: 270 cm x 120 cm, untrimmed
Format ware: 59 cm x 29 cm
Thickness: 1 to 3 mm

Peel resistance: In accordance with DIN 16860, average 1.76 - 1.98 N/mm

Tensile shear strength: In accordance with DIN 16860, 0.7 - 0.84 N/mm²

Castor chair suitability: In accordance with DIN EN 425 and DIN 68131, type „W“

Fire behaviour: A2 - s1, d0 with DIN EN 13501