MODULES LED 3000K 230V CRI 90 MacAdam step 3
Rated luminaire luminous flux: 392lm
Rated input power: 10.7W
Luminaire efficacy: 37lm/W
Electronic ballast 220÷240V 50/60Hz
CE
PRODUCT TYPE
Inground walk over fitting. Recessing depth 95 mm. IP rating IP 67
MATERIAL CHARACTERISTICS
"Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09 Maximum load capacity 500 Kg
LIGHTING PERFORMANCE
acid-etched Toughened glass 6mm thick. Lamp fixed position. LOR -- Compact electronic ballast to guarantee better lamp stability, lifetime and reduced energy consumption.
LOW SURFACE TEMPERATURE
Surface temperature of glass 40°C (Ta 25°C) Electronic Ballast generating less heat.
Specific layout of internal components allow for better heat dissipation therefore limiting the temperature generated inside the fitting.
RECESSING BOX
Recessing box in alluminium with cable entry on all 4 sides also allows: 1) Easy wiring; 2) Cable management for fast connector; 3) Easy access to the fitting for maintenance purposes.
WIRING
Supply 0.5m cable section type H07RN-F and sealed with B component epoxy resin, wired internally protected by silicon sheaths. Fast connector M20 (Ø 5÷14 mm) supplied as standard for single cable connection . Connector housed inside the recessing box . Connection joint: The housing of Miniround has a 'dove-tail' joint to perfectly connect two or more consecutive fittings (5 consecutive products create a full circle). Isolation: CLASS I . Finishing : FULL-GLASS Weight: Kg Glow Wire test: --
L.E.D circuit included.
This luminaire contains built-in LED modules with energy class: A, A+, A++. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.
Concept
Minilinear is a recessed luminaire perfectly flush with the floor that disappears completely integrating with the architecture. The soft or accent lighting effect mark pathways and facades discreetly. Miniround embraces the elegant flush lines of Minilinear in a curved structure capable of designing striking lighting frames. Miniround emphasizes trunks and green foliage, colonnades, sculptures and non-linear paths.
Manufacturer
Simes
Family
Minilinear-Miniround
Architonic ID
1540255
Order number
S.5402W
Year of Launch
2017
Previous Product 
Search products by image
Pin it 
Save as pdf
