Optimal Basic Flush-Mount Housing

OPTIMAL-BASIC
Flush-Mount Housing

12 Volt
Flush-mount housing for ceilings with adapter for the OPTIMAL system reflectors. Four low-voltage versions are available. The cut-out diameter is 80mm/3.15”. The edge is just 8,5 mm/0.33” in width. The housing can be mounted very simply by means of two spring steel hangers.

OPTIMAL A (12 V)
Recessed depth 70mm/2.8”. For reflectors 1, 2, 3, 4. For use with low-voltage halogen bi-pin lamps.

OPTIMAL B (12 V)
Recessed depth 86mm/3.4” For reflectors 1, 2, 4. For use with low-voltage halogen bi-pin lamps.

OPTIMAL C (12 V)
Recessed depth 102mm/4.1”. For reflectors 1, 2. For use with low-voltage halogen bi-pin lamps.

OPTIMAL D (12 V)
Recessed depth 130 mm/5.9”. For reflector 1. For use with low-voltage halogen bi-pin lamps.

Lamps: QT-LP12 Axial: 12V max 50W; GY 6.35; IP 20

230/120Volt
All dimensions and features are the same as for the low-voltage versions.We offer two different high-voltage versions: A G9 halogen version for use with 60W max. or a HIT/metal halide version with G8.5 socket for 35W. 20W or 70W versions available on request. The electronic ballast and the cover glass are included. The high-voltage versions are not useable with glass reflectors..

OPTIMAL B (230 V)
110/230V version for G9 Halopin lamps. Recessed depth 86mm/3.4”. For reflectors 1, 2, 4.

OPTIMAL C (230 V)
110/230V version for G9 Halopin lamps. Recessed depth 102mm/4.1”. For reflectors 1, 2, 4.

OPTIMAL C HIT
110/230V version for 35- or 70W. HIT/metal halide lamps. Recessed depth 102mm/4.1”. For reflectors 1, 2, 4.

OPTIMAL D HIT
110/230V version for for 35- or 70W. HIT/metal halide lamps. Recessed depth 130mm/5.9”. For reflector 1, 2.

Lamps:
Halopin G9; QT-LP 13; 230V max 60W. 120V max 60W; IP20
HIT Versionen:
HIT-CRI (CDM-TC); 230V 35W, 120V 35 W; G8.5
HIT-CRI (CDM-TC); 230V 70W, 120V 70W; G8.5; IP 20