Dorment

Tailor made profile system exists in an aluminium base profile combined with a snap in frosted PMMA diffussor. The frosted diffussor is ideal for general lighting and to create lightlines especially in combination with T5 seamless tubes.
The DORMENT profile is especially developed to be used in combination with standard T5 tubes and the seamless versions.

Uplight is possible via ledstrips in the upper side and are diffused with a small polycarbonate diffuser.
This system can be installed directly on the wall or ceiling and suspended is also possible.
It is possible to combine different profiles by cornerbrackets etc.

Materials and finish:

Profile: extruded aluminium (AlMgSi0,5) – powder coated in textured white or natural anodized
Diffuser: Extruded frosted PMMA
Endcaps: aluminium - powder coated in textured white or natural anodized

Installation and lamp replacement:

The profile is mounted directly to the ceiling or the wall and can be screwed on any surface.
The profile can be suspended via an extra suspension kit which can be screwed easily to the ceiling. The height can be adjusted very simple and at every height.

The diffussor can easily be removed with a suction cap, in this way you have access to the bulbs.

Technical data:

Cut-out: N/A
Installation depth: N/A
Luminaire dimensions: section 85X85 mm
Weight: 2,3 kg/m
Adjustability: Diffused light

Electrical data:

Lamp type: T5 & T5S
Lamps: Dependant length of profile
Lampholders: G5
Control gear: Integrated
Input supply voltage: 230V-50Hz
Connector block: 2,5mm²
Glow wire resistance: 960 °C
IP rating: IP20